OPTIMAL POSITIONING OF AIR PURIFIERS BY USING AEROSOL SIMULATIONS

ONLY 3 STEPS TO PLAN YOUR ROOM SAFE FROM COVID-19 WITH  3D CFD FLOW SIMULATIONS

Reduce the spread of viruses with CFD simulations!

The purpose of an air purifier is to filter aerosols that are responsible for the spread of viruses, such as coronaviruses, from the air in order to significantly reduce the risk of infection in different rooms. Each room is different and has its own special characteristics that have a decisive influence on the actual effect of air purifiers.

To ensure optimal air purification performance, the positioning and number of air purifiers is crucial. With the help of 3D flow simulations, the optimal use can be detected in each case so that all aerosols in the room are filtered as efficiently as possible.


ONLY 3 STEPS TO THE OPTIMAL SOLUTION

STEP 1: DIGITAL ROOM MODELLING

With the help of uploaded photos, floor plans or sketches as well as specified room dimensions, the room is digitally recreated. The reproduction is then translated into a geometry.

Alternatively, a geometry can also be created directly with the 3D tool in the web browser.

STEP 2: CALCULATION

The flow simulation identifies distruptive factors such as air turbulence or dead zones in parts of the room with no flow, which affect air purification.

STEP 3: POSITIONING OF THE AIR CLEANER

Based on the simulation results, the optimal position of the air filter in the room can be determined. The correct position is essential because the filter can only be used efficiently in this way. This drastically reduces the risk of infection for people in closed rooms.


We will answer your questions and look forward to optimising the air purification effect of your equipment with our simulations.